Allen-Bradley PowerFlex 6000 Firmware, Parameters, And Troubleshooting Manual

118 Rockwell Automation Publication 6000-TD004D-EN-P - November 2017
Chapter 2 Parameter Descriptions
Load Loss Control Scaling Factor
Linear Number: P049
Default Value: 0%
Minimum Value: 0%
Maximum Value: 2000%
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the scaling factor for Load Loss Control.
Load Loss Control Integral Time
Linear Number: P050
Default Value: 0 ms
Minimum Value: 0 ms
Maximum Value: 100 ms
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Load Loss Control Integral Time.
Load Loss Control Filter Time
Linear Number: P051
Default Value: 100 ms
Minimum Value: 0 ms
Maximum Value: 200 ms
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Load Loss Control Filter Time.
Load Loss Enable Current Threshold
Linear Number: P052
Default Value: 10%
Minimum Value: 0%
Maximum Value: 100%
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Load Loss Enable Current Threshold.

Allen-Bradley PowerFlex 6000 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 6000
Category	DC Drives
Language	English