Allen-Bradley PowerFlex 6000 Firmware, Parameters, And Troubleshooting Manual

124 Rockwell Automation Publication 6000-TD004D-EN-P - November 2017
Chapter 2 Parameter Descriptions
Motor Stator Leakage Inductance LIs
Linear Number: P142
Default Value: 0.0 mH
Minimum Value: 0.0 mH
Maximum Value: 3276.7 mH
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Motor Stator Leakage Inductance LIs.
Motor Rotor Leakage Inductance LIr
Linear Number: P143
Default Value: 0.0 mH
Minimum Value: 0.0 mH
Maximum Value: 3276.7 mH
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Motor Rotor Leakage Inductance LIr.
Motor Autotune Rs Upper Limit
Linear Number: P178
Default Value: 50%
Minimum Value: 0%
Maximum Value: 100%
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Motor Autotune Rs Upper Limit.
Motor Autotune Maximum Iq For No Load
Linear Number: P179
Default Value: 30.00%
Minimum Value: 0.00%
Maximum Value: 399.99%
Access Level: R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Motor Autotune Maximum Iq For No Load.

Allen-Bradley PowerFlex 6000 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 6000
Category	DC Drives
Language	English