Allen-Bradley PowerFlex 6000 Firmware, Parameters, And Troubleshooting Manual

Rockwell Automation Publication 6000-TD004D-EN-P - November 2017 123
Parameter Descriptions Chapter 2
Motor Stator Resistance Rs
Linear Number: P138
Default Value: 0 Ω
Minimum Value: 0 Ω
Maximum Value: 10 Ω
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Motor Stator Resistance Rs.
Motor Magnetizing Current Id
Linear Number: P139
Default Value: 30%
Minimum Value: 0%
Maximum Value: 100%
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Motor Magnetizing Current Id.
Motor Rotor Resistance Rr
Linear Number: P140
Default Value: 0 Ω
Minimum Value: 0 Ω
Maximum Value: 10 Ω
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Motor Rotor Resistance Rr.
Motor Magnetizing Inductance Lm
Linear Number: P141
Default Value: 0.0 mH
Minimum Value: 0.0 mH
Maximum Value: 3276.7 mH
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Motor Magnetizing Inductance Lm.

Allen-Bradley PowerFlex 6000 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 6000
Category	DC Drives
Language	English