AMX Enova DGX 100 Series

Integrated Master - NetLinx Programming
224
Enova Digital Media Switchers - Hardware Reference Manual
DXLink SEND_COMMANDs (Cont.)
Command Description
?VIDIN_PHASE Requests the input phase of the specified VGA video port. This command is valid only for inputs whose
format is set to VGA.
Syntax:
SEND_COMMAND <DEV>,"'?VIDIN_PHASE'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_PHASE'"
Returns a COMMAND string of the form:
VIDIN_PHASE-<value>
VIDIN_PHASE Sets the input phase of the specified VGA video port. This command is valid only for inputs whose
format is set to VGA.
Syntax:
SEND_COMMAND <DEV>,"'VIDIN_PHASE-<value>'"
Variable:
• value = 0 to 31
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_PHASE-23'"
Sets the phase of video input port (#1 based on D:P:S) to 23.
?VIDIN_VSHIFT Requests the vertical shift value of the specified RGB video input port.
Syntax:
SEND_COMMAND <DEV>,"'?VIDIN_VSHIFT'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_VSHIFT'"
Returns a COMMAND string of the form: VIDIN_VSHIFT-<value>
VIDIN_VSHIFT Sets the vertical shift of the video port addressed by the D:P:S to <value>.
Syntax:
SEND_COMMAND <DEV>,"'VIDIN_VSHIFT-<value>'"
Variable:
• value = -10 to 10
Example:
SEND_COMMAND <DEV>,"'VIDIN_VSHIFT-2'"
Sets the vertical shift of RGB video input port (#1 based on D:P:S) to 2 (shift upward).
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_VSHIFT--3'"
Sets the vertical shift of RGB video input port (#1 based on D:P:S) to -3 (shift downward).