Integrated Master - NetLinx Programming
233
Enova Digital Media Switchers - Hardware Reference Manual
NOTE:
Use the Enova DGX Configuration Tool located at www.AMX.com/enova to determine the power requirements of a configuration
and whether any of the DXLink Transmitters or Receivers should be powered with the local power supply to maintain power supply
redundancy in the Enova DGX 32 enclosure.
NetLinx NX Telnet Commands for the Integrated NetLinx NX Master (Cont.)
Command Description
PROGRAM INFO Displays a list of program files and modules residing on the integrated Master.
Example:
>PROGRAM INFO
-- Program Name Info
-- Module Count = 1
1 Name is i!-PCLinkPowerPointTest
-- File Names = 2
1 = C:\Program Files\AMX Applications\i!-PCLinkPowerPoint
2 = C:\Program Files\Common Files\AMXShare\AXIs\NetLinx.axi
2 = Name is MDLPP
--File Names = 2
1 C:\AppDev\i!-PCLink-PowerPoint\i!-PCLinkPowerPointMod.axs
2 C:\Program files\Common Files\AMXShare\AXIs\NetLinx.axi
REBOOT Reboots the integrated Master or specified device. Options for rebooting the Master are cold, soft, and
warm. The reboot command with no parameter executes as "reboot cold".
Example (Rebooting device):
>REBOOT [0:1:0]
Rebooting...
Example (Rebooting Master):
>reboot cold
Reboots the Master and restarts the entire operating system.
>reboot warm
>reboot soft
Reboots the Master but only starts the AMX NetLinx application firmware.
To Next Page
Loading...
Need help?
General
