AMX Enova DGX 100 Series Hardware Reference Manual

Integrated Master - NetLinx Programming
229
Enova Digital Media Switchers - Hardware Reference Manual
Audio Output SEND_COMMANDs (Cont.)
Command Description
?AUDOUT_EQ_Q Requests the quality factor (Q) on the specified equalizer band on the audio output port addressed
by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?AUDOUT_EQ_Q-<band>'"
Example:
SEND_COMMAND AUDIO_OUTPUT_1, "'?AUDOUT_EQ_Q-1'"
Returns a COMMAND string of the form:
AUDOUT_EQ_Q-<band>,<factor>
Note: See the AUDOUT_EQ_Q command for the list of band and factor ranges.
AUDOUT_EQ_Q Sets the quality factor (Q) on the specified equalizer band on the audio output port addressed by
the D:P:S to <value>.
Syntax:
SEND_COMMAND <DEV>, "'AUDOUT_EQ_Q-<band>,<factor>'"
Variables:
• band = 1 to 10 if on the audio output port.
• factor = range depends on filter type (AUDOUT_EQ_FT)
• Bell range = 0.1 to 20.0
• Band Pass range = 0.1 to 20.0
• Band Stop range = 0.1 to 20.0
• High Pass range = 0.5 to 1.4
• Low Pass range = 0.5 to 1.4
• Treble Shelf range = 0.5 to 1.0
• Bass Shelf range = 0.5 to 1.0
Example:
SEND_COMMAND AUDIO_OUTPUT_1, "'AUDOUT_EQ_Q-1,8'"
Sets the Q on band #1 of the audio port 1 equalizer to 8.
?AUDOUT_MAXVOL Requests the current maximum volume for the audio port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?AUDOUT_MAXVOL'"
Example:
SEND_COMMAND AUDIO_OUTPUT_1, "'?AUDOUT_MAXVOL'"
Returns a COMMAND string of the form:
AUDOUT_MAXVOL-<maximum>
See the AUDOUT_MAXVOL command for the maximum volume range.
AUDOUT_MAXVOL Sets the maximum volume for the audio port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDOUT_MAXVOL-<maximum>'"
Variable:
• maximum = 0 to 100 (in %)
Example:
SEND_COMMAND AUDIO_OUTPUT_1, "'AUDOUT_MAXVOL-75'"
Sets the maximum for the audio output port to 75%.
?AUDOUT_MINVOL Requests the current minimum volume for the audio port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?AUDOUT_MINVOL'"
Example:
SEND_COMMAND AUDIO_OUTPUT_1, "'?AUDOUT_MINVOL'"
Returns a COMMAND string of the form:
AUDOUT_MINVOL-<minimum>
Note: See the AUDOUT_MINVOL command for the minimum volume range.
AUDOUT_MINVOL Sets the minimum volume for the audio port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDOUT_MINVOL-<minimum>'"
Variable:
• minimum = 0 to 100 (in %)
Example:
SEND_COMMAND AUDIO_OUTPUT_1, "'AUDOUT_MINVOL-5'"
Sets the minimum for the audio output port to 5%.
?AUDOUT_MUTE Requests audio mute status.
Syntax:
SEND_COMMAND <DEV>, "'?AUDOUT_MUTE'"
Example:
SEND_COMMAND dxDev, "'?AUDOUT_MUTE'"
Returns a COMMAND string of the form:
AUDOUT_MUTE-<ENABLE|DISABLE>

AMX Enova DGX 100 Series Specifications

General

Brand	AMX
Model	Enova DGX 100 Series
Category	Switch
Language	English