Firmware Upgrade & Info for Network Admin
235
Enova Digital Media Switchers - Hardware Reference Manual
3. Click Browse (...) to locate target directory in the Browse For Folder dialog. Select the desired files for the Master
upgrade and the switcher upgrade and click OK:
4. Select the "Master" KIT file from the Files list:
If both require updates, always upgrade in the following order:
Device 0 – NetLinx integrated Master
Device 5002 (default) – Enova DGX
The selected directory path is displayed in the Send to NetLinx Device dialog (Location field).
Assuming the specified target directory contains one or more KIT files, the KIT files in the selected directory are
displayed in the Files list along with the last modified date and time.
5. Check the number for the device to be upgraded in the Device text box.
The device number assigned to the integrated Master is 0 (zero).
The switcher’s default device number is 5002. (If the device number has been changed, use the OnLine Tree to
determine it.)
6. Review the File and Target Device information before you send the KIT file.
FIG. 122
Send To NetLinx Device dialog (NetLinx Studio)
FIG. 123 Send To NetLinx Device dialog (NetLinx Studio)
FIG. 124 Send To NetLinx Device dialog showing KIT file for the integrated Master selected
Browse for folder containing the KIT file
To Next Page
Loading...
Need help?
General
