Working With the Resource Manager
54
TPDesign4 Touch Panel Design Program
2. Create a button (type General) in the interface that matches the output resolution of the camera/
video server (some cameras/servers support more than one output resolution - in this case,
select one that fits your application requirements/interface design).
3. Go to the States tab in Button Properties and select the Dynamic Image (in our case, "Network
Camera") created in Step I as Bitmap image for the target button created in Step 2.
Motion JPEG Cameras and Servers that provide Motion JPEG streaming output
A number of leading manufacturers are offering a variety of equipment that provides Motion JPEG
streaming output. Below is a sample list of the most popular manufacturers and models:
FIG. 18 Creating a Dynamic Image - Step 2
FIG. 19 Creating a Dynamic Image - Step 3
Manufacturer Network camera Network video server
Axis • 205 Network Camera
• 2100 Network Camera
• 2120 Network Camera
• 2420 Network Camera
• 241Q Video Server 4 Inputs
• 241S Video Server 1 Input
To Next Page
Loading...