Working With the Resource Manager
61
PDesign4 Touch Panel Design Program
Working With Video Fills
If you are designing a project targeted at a video-capable panel, you can assign a "video fill" to a
page, popup page or button. TPDesign4 supports video fills directly to the page/popup page,
without having to create a page-size button (as was the case in TPDesign3).
 The NXP-TPI/4 accommodates up to four video source inputs, and you can select any
available video source (1-4) as the source for a video fill.
 See the Supported Panel Types section on page 2.
Streaming Video Fill
If the project specifies a touch panel that supports streaming video (NXD/NXT-1200VG,
NXD/NXT-1500VG, and NXD/NXT-1700VG only), Streaming Source is available as a video fill
option.
If Streaming Source is selected from the drop-down list of Video Fill options (in the States tab of the
Properties Control window), then Streaming Source is added to the list of state properties.
Enter the URL or IP Address of the server that will provide the video stream in the Streaming
Source field.
To Next Page
Loading...
Need help?
General
