Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Slide -T40093/4- onto square tube.
– Slide -T40091/2- with -T40093/5- into both -T40093/4- .
WARNING
Risk of an accident due to loose support bridge parts.
♦ Secure -T40091/2- with pins and splints from -T40093/4- .
♦ Secure connector and supports with locking bolts.
– Install -10 - 222 A /11- on slide and engine lifting eye.
– Tension the engine/transmission assembly by tightening the
3 spindles evenly.
– Remove both front wheels.
– Remove noise insulation in center by loosening fasteners
-1 through 4-.
– Remove left and right noise insulation -arrows-.
– Remove the noise insulation frame -arrow-. Refer to ⇒ Body
Exterior; Rep. Gr. 50 ; Removal and Installation .
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
4. Removal and Installation 101
To Next Page
Loading...
