Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Engine Support Basic Set -T40091-
♦ Engine Support Supplement Set -T40093-
Removing
– Remove the entire air filter housing. Refer to ⇒ Fuel Injection
and Ignition; Rep. Gr. 24 ; Removal and Installation .
– Remove air filter housing bracket -arrows-.
– Install -T10338- on open threaded hole at left rear of engine.
– Position -10 - 222 A- with the following tool components on the
upper edges of the web plate:
♦ Bracket for engine -10 - 222 A /1- , qty. 2
♦ Bracket with spindle and hook -10 - 222 A /10- (spindle faces
toward rear)
♦ Spindle -10 - 222 A /11- (spindle faces toward front)
♦ Shackle -10 - 222 A /12-
♦ Connectors -T40091/3- , qty. 2
– Engage -10 - 222 A /11- with -10 - 222 A /12- on right engine
lifting eye.
– Engage -10 - 222 A /10- on -T10338- .
– Lightly tension the engine/transmission assembly with the
spindles.
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
114 Rep. Gr.34 - Controls, Housing
To Next Page
Loading...
