Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove noise insulation in center by loosening fasteners
-1 through 4-.
– Remove right noise insulation -arrows-.
– Remove noise insulation frame -arrow-. Refer to ⇒ Body Ex‐
terior; Rep. Gr. 50 ; Removal and Installation .
– Disconnect electrical connector -1- on oil level thermal sensor
-G266- .
– Unclip bracket -2- for electrical wire to oil level thermal sensor
on subframe.
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
4. Removal and Installation 119
To Next Page
Loading...
