Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Holding Fixture -VW 313-
♦ Transmission Support -VW 353-
♦ Thrust Pad 16.5/28 mm Dia. -VW 431-
♦ Thrust Pad Con. 8/65 -VW 433-
♦ Thrust Tube -VW 454-
♦ Thrust Pad -VW 512-
♦ Tube 42 mm Dia. -VW 516-
♦ Sleeve -VW 519-
♦ Slide Hammer-Complete Set -VW 771-
♦ Holding Fixture -VW 801-
♦ Thrust Piece -40 - 105-
♦ Spacers -VW 540/1 B-
♦ Sleeve -40 - 20-
♦ Sleeve -40 - 21-
♦ Thrust Plate -2050-
♦ Tapered Roller Bearing Puller -V.A.G 1582-
♦ Grip -V.A.G 1582/7-
♦ Kukko extractor 21/7 and 21/8
♦ Puller 18/2
♦ Separating tool 17/2
♦ Kukko 22/2 counter-support
Pull Dished Washer -A- Out of Output Shaft
Pressing Dished Washer in Output Shaft to Stop
• Dimension -a- = 2 mm
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
3. Disassembly and Assembly 195
To Next Page
Loading...
