Audi TT 2007 - Page 77

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Release cable retainer -A- for selector and shift cables -B- as fol‐
lows:
– Push sleeve forward up to the stop -arrow 1-.
– Turn sleeve to the right up to the stop -arrow 2- so that it en‐
gages.
Note
The cable -B- must be able to move in the cable retainer.
• Transmission in neutral position.
Secure shift rod as follows:
– Press transmission shift lever -1- down in direction of
-arrow A-.
– Engage lock elbow -2- by turning slightly in direction of
-arrow B- and pressing in direction of -arrow C- at the same
time.
This locks the selector shaft; it can no longer be moved.
– Make sure that the selector and shift cable -B- are inserted
free of tension in the retainer -A-.
– Loosen the sleeve -arrow 1-.
– Allow the sleeve to slide to the stop -arrow 2-.
The cable is now adjusted.
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
2. Description and Operation 71