AudioCodes Mediant 500L - Page 1007

Version 7.2 1007 Mediant 500L Gateway & E-SBC
User's Manual 69. Configuration Parameters Reference
Parameter Description
Web Login page for logging in to the Web interface.
The format of the ini file table parameter is:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text
[\WelcomeMessage]
For Example:
FORMAT WelcomeMessage_Index = WelcomeMessage_Text
WelcomeMessage 1 = "**********************************" ;
WelcomeMessage 2 = "********* This is a Welcome message ***"
;
WelcomeMessage 3 = "**********************************" ;
Note:
 Each index row represents a line of text in the Welcome
message box. Up to 20 lines (or rows) of text can be defined.
 The configured text message must be enclosed in double
quotation marks (i.e., "...").
 If the parameter is not configured, no Welcome message is
displayed.
Customizing Web GUI
[WelcomeMessage]
configure system >
welcome-msg
Defines a welcome message displayed on the Web interface's
Web Login page.
The format of the ini file table parameter is:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text
[\WelcomeMessage]
For Example:
FORMAT WelcomeMessage_Index = WelcomeMessage_Text
WelcomeMessage 1 = "**********************************" ;
WelcomeMessage 2 = "********* This is a Welcome message ***"
;
WelcomeMessage 3 = "**********************************" ;
For more information, see Creating a Login Welcome Message
on page 71.
Note:
 Each index row represents a line of text. Up to 20 lines (or
rows) of text can be defined.
 The configured text message must be enclosed in double
quotation marks (i.e., "...").
 If the parameter is not configured, no Welcome message is
displayed.
[UseProductName]
Enables the option to customize the name of the device (product)
that appears in the management interfaces.
 [0] = Disabled (default).
 [1] = Enables the display of a user-defined name, which is
configured by the UserProductName parameter.
For more information, see Customizing the Product Name on
page 69.
[UserProductName] Defines a name for the device instead of the default name.