Avaya MCC1 - Administer No-License;Emergency Numbers [From R5;R6;R7;R8 Si]; Direct Connection between the Switch and RFA; No Connection between the Switch and RFA

R5/R6/R7/R8si to Avaya Communication Manager
Task List: R5/R6/R7/R8si to Avaya Communication Manager
124 SI Installation and Upgrades
June 2004
Direct connection between the switch and RFA
a Go to the RFA website, and, following the instructions in the “Deliver to G3r/G3si/G3csi”
chapter of the RFA Job Aid, deliver the License File.
NOTE:
This procedure sends the License File to the switch and installs it.
b If the system has IP endpoints registered, and you unplugged the Ethernet cable from the
TN799 (C-LAN) circuit pack, replug the cable.
This re-registers the IP endpoints.
No connection between the switch and RFA
a Go to the RFA website, and, following the instructions in the “Deliver to G3r/G3si/G3csi”
chapter of the RFA Job Aid, deliver the License File to your laptop/PC.
b Open the License Installation Tool (LIT) application at your laptop/PC.
c Use the LIT instructions to add a switch connection profile to the tool.
d Use the LIT instructions to install the License File on the switch.
e If the system has IP endpoints registered, and you unplugged the Ethernet cable from the
TN799 (C-LAN) circuit pack, replug the cable.
This re-registers the IP endpoints.
Administer No-License/Emergency Numbers
[from R5/R6/R7/R8si]
Return to Task List
If the system enters a No-License mode, the switch only processes emergency calls. Use this procedure to
adminster the emergency numbers for No-License mode situations.
1 At the SAT, type change system-parameters features and press Enter.
The Feature-Related System Parameters screen displays.
2 In the Emergency Numbers - Internal field (optional) type a valid extension.
NOTE:
This field is intended for campus environments where there is an internal emergency
number that people are directed to use instead of 911. Calls to other extensions will not go
through. This number cannot be a hunt group or ACD number.
3 In the Emergency Number - External field (required) type a 21-digit, dialpad-valid
character string that can include trunk access codes. The default for this field is 911.
4 In the No-License Incoming Call Number field (optional) type a valid extension.
NOTE:
All calls are not rerouted to this number; only calls to this number get through. This
number cannot be a hunt group or ACD number.
5 Press Enter to save the changes.