G3V4vs/R5vs/R6vs to Avaya Communication Manager
Task List: DEFINITY vs to Avaya Communication Manager
SI Installation and Upgrades 141
June 2004
23 Move management terminal cable from G3V4vs/R5vs/R6vs
NOTE:
Any BX.25 adjunct links to adjuncts (for example, CMS, AUDIX, INTUITY, or others)
that are to be retained will still reside on the existing TN765 processor interface (P/I) in
the designated P/I slot.
24 Move circuit packs from G3V4vs/R5vs/R6vs
25 Verify TDM cables and connectors [from G3V4vs/R5vs/R6vs]. If new TDM terminators and
cables are required, install them now.
26 Connect control cabinet power and ground [from G3V4vs/R5vs/R6vs]
27 Power up [from G3V4vs/R5vs/R6vs]
28 Deliver or install the License File [from G3V4vs/R5vs/R6vs]
29 Administer No-License/Emergency Numbers [from G3V4vs/R5vs/R6vs]
30 Set Daylight Savings rule [from G3V4vs/R5vs/R6vs]
31 Check customer options [from G3V4vs/R5vs/R6vs]
32 Verify the upgrade [from G3V4vs/R5vs/R6vs]
33 Restore busyouts [from G3V4vs/R5vs/R6vs]
34 Run acceptance tests [from G3V4vs/R5vs/R6vs]
35 Enable Scheduled Maintenance and Alarm Notification [from G3V4vs/R5vs/R6vs]
36 Register the switch for maintenance [from G3V4vs/R5vs/R6vs]
37 Restore announcements [from G3V4vs/R5vs/R6vs] or Rerecord announcements [from
G3V4vs/R5vs/R6vs] as necessary.
38 Save announcements and translation [from G3V4vs/R5vs/R6vs]
39 Disassemble the G3V4vs System [from G3V4vs/R5vs/R6vs]
40 Return equipment [from G3V4vs/R5vs/R6vs]
Verify the required hardware [from
G3V4vs/R5vs/R6vs]
Return to Task List
The equipment in this table must be on-site before the upgrade begins.
The TSC cannot source equipment for you.
To place a claim for missing equipment as part of the Streamlined Implementation process, call 1-800-
772-5409 and respond to the call prompter, or call the number provided by your Avaya representative.
To Next Page
Loading...
