Avaya MCC1 - Pre-Upgrade Administration

Release 9si/10si/Communication Manager 1.x to Communication Manager 2.1
Task list: R9si/10si/Communication Manager 1.x to Communication Manager 2.1
SI Installation and Upgrades 45
June 2004
Pre-upgrade administration
Return to Task List
You must make the administration changes prior to the upgrade.
1 Remove Print Messages Feature Access Code
Remove the value from the Print Messages Access Code field on the Feature Access Code (FAC) form.
This feature access code allows users to print undelivered messages without having to call the message
center.
2 Remove print-msgs buttons
If any of the Button Assignments are administered as
print-msgs (print messages) on the Station and
Attendant forms, remove these buttons.
3 Remove MSA node names
Remove all MSA node names from the
MSA Names field on the Audix-MSA Node Names form.
4 Remove MSA processor channels
If the
Appl. field on the Processor Channel Assignment form is
• msaamwl
• msaclk
• msahlwc
• msallwc
• msamcs
you must remove this administration. These processor channel assignments are used in conjunction with
a messaging adjunct that is no longer supported.
5 Remove MET station administration
If the field value in the
Type field on the Station form is
• 10MET
• 20MET
• 30MET
you must remove these stations from administration. These Multi-Button Electronic Telephone (MET)
stations are no longer supported and will not work after the upgrade.
Return to Task List