Release 9si/10si/Communication Manager 1.x to Communication Manager 2.1
Task list: R9si/10si/Communication Manager 1.x to Communication Manager 2.1
60 SI Installation and Upgrades
June 2004
18 Review the information displayed in the report.
If any of the data are incorrect, contact the DBA Group (1-800-248-1234, selecting prompt, 2,
prompt 6, then prompt 2) immediately for assistance.
19 Save the DEFINITY Upgrade Registration Report in a file for future reference or print the report
and keep the copy.
Return to Task List
Resolve alarms
Return to Task List
1 Type display alarms and press Return.
2 Examine the alarm log.
3 Resolve any alarms.
Return to Task List
Restore busyouts
Return to Task List
1 Restore any busyouts that you removed in the Verify system status section prior to the upgrade.
Return to Task List
Restore announcements (TN750 or TN750B
only)
Return to Task List
1 Insert the white flash card with the saved announcements.
2 Type restore announcements and press Return.
This command takes about 45 minutes to execute.
Return to Task List
Check SPE
1 Type status system 1 and press Return.
Check these fields for the corresponding values:
—
Maj/Min alarms = 0
—
Service State = in (service)
Return to Task List
To Next Page
Loading...
