Bring the System Online
Task List: Administer the System
464 SI Installation and Upgrades
June 2004
Task List: Administer the System
1 Log in to the System on page 464
2 Deliver or install the License File on page 464
3 Administer no-license/emergency numbers on page 467
4 Change Site Data (MCC1 only) on page 467
5 Change Cabinet 1 (MCC1 only) on page 467
6 Add Cabinet 2 through N (AvayaDEFINITY Server r) on page 469
7 Set Country Options on page 470
8 Change the Password on page 472
9 Set Daylight Savings Rules on page 473
10 Set Date and Time on page 474
Log in to the System
Return to Task List
1 Log in as craft.
NOTE:
If you have a dadmin login and password, you can use them instead of craft and the craft
password. You may have to contact Avaya to get the dadmin password.
2 Verify the screen displays password:
3 Type the default password and press Enter.
For security reasons, the password is not displayed as it is typed. The system verifies a valid login
and password name were entered.
4 If an invalid login or password name was entered, the screen displays login incorrect: In
this case, repeat the procedure using the correct login and matching password.
5 If the system recognizes the login and password name, the screen displays the software version.
Verify the screen display is similar to:
Terminal Type (513, 715, 4410, 4425, VT220): [715]
6 Type the number of the management terminal and press Enter.
7 Verify the screen displays command:
Return to Task List
Deliver or install the License File
Return to Task List
CAUTION:
This procedure must be done immediately after you upgrade the software. If the license
file is not installed within 10 days, the switch enters a No-License mode and shuts down
all call processing.
To Next Page
Loading...
