G3V4vs/R5vs/R6vs to Avaya Communication Manager
Task List: DEFINITY vs to Avaya Communication Manager
SI Installation and Upgrades 151
June 2004
Check existing software load [from
G3V4vs/R5vs/R6vs]
Return to Task List
1 Type list configuration software-versions memory-resident and press Enter.
2 Record the software load.
Verify system status [from G3V4vs/R5vs/R6vs]
Return to Task List
1 Verify that system status is normal.
Execute
status system 1 (If status is not normal, take the needed corrective actions.)
2 Verify that the system is alarm-free.
Execute
display alarms (If the system is not alarm-free, take the needed corrective actions.)
3 Identify and record customer-placed busy-outs.
Execute
display errors (Examine the error log and record the error 18s that identify the busy-outs
placed by the customer.)
NOTE:
You will restore the customer-placed busy-outs after you have upgraded the system.
4 For a system that has existing BX.25 links that are being retained after the upgrade: identify and
record them.
Execute
display communication-interface links
5 Execute the following commands and verify that the information is correct:
list station
list trunk-group
list hunt-group
list data-module
For upgrades from systems later than G1, list ars analysis
For a system with Expert Agent later than G3V3,
list agent
If any command does not complete successfully, escalate the problem immediately.
Return to Task List
To Next Page
Loading...
