Contents
SI Installation and Upgrades 5
June 2004
Contents
Upgrades to Avaya Commnication
Manager Made Easy 29
• Note these important considerations: 29
• Upgrade Procedures 29
• Before you start 30
Preparation and process steps 30
Make the Blowback Tape 33
Blowback vs. On site? 33
What DEFINITY System Is This? 34
Minimum required hardware 35
When to use the TN2401 versus the TN2401/2400 sandwich pack 36
Release 9si/10si/Communication
Manager 1.x to Communication Manager 2.1 39
• Read this first 39
License File 39
Service interruption 39
Call Management System (CMS) 39
Software compatibility 40
Usable circuit packs 40
Wireless systems 40
Antistatic protection 40
• Task list: R9si/10si/Communication Manager 1.x
to Communication Manager 2.1 40
Pre-upgrade checklist 42
Go to the RFA website 43
G3V4 through Release 9si upgrades only 43
Direct connection between the switch and RFA 43
No connection between the switch and RFA 44
If you have problems with RFA 44
Pre-upgrade administration 45
Check SPE 46
Verify the software version 46
Verify system status 46
Disable Scheduled Maintenance and Alarm Origination 47
Check link status 48
To Next Page
Loading...
