EasyManua.ls Logo

Avaya MCC1 - Page 31

Avaya MCC1
874 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Upgrades to Avaya Commnication Manager Made Easy
Before you start
SI Installation and Upgrades 31
June 2004
3 Verify expansion interface compatibility for packet bus
applications:
If the new system will have one or more expansion port
network cabinets and will run any packet applications, do not
reuse the TN776 expansion interface circuit packs; they must
be replaced with TN570 circuit packs.
Before upgr Project Mgr
4 Identify proper TDM/LAN bus cables and terminators for the
system.
If PACCON is not currently enabled, the cables and
terminators may need to be replaced for V3 and later si
systems, R5/R6vs systems, and SRPs upgrading to Avaya™
Communication Manager.
Packet applications currently running in one port network do
not guarantee that the system has the correct hardware.
Adding a packet application to another network without
verifying the TDM/LAN bus cables and terminators
frequently causes upgrade problems.
We recommend that you schedule a time to replace the cables
and terminators before the upgrade. Note that this requires a
service outage.
Before upgr Project Mgr
5 Check for software upgrade compatibility:
current software patches that will need to be re-
applied
software upgrades that include all relevant bug fixes
Before upgr Project Mgr
6 Use the latest software QPPCN to check the vintages of all
circuit packs that will be reused in the upgrade.
a Replace circuit packs that have unusable vintages.
b Make a final vintage check.
For current information about usable vintages in a
DEFINITY ECS system, see the Stockable, Minimum
Usable Vintages, & Certifiable Vintages, COMPAS
ID 42751.
Before upgr Design Spec
7 For blowback upgrades only: Make the Blowback Tape. The
blowback tape is converted and written to removable media.
This takes 2 weeks and must be done before the upgrade.
Before upgr Tech or
Design Spec
8 Schedule the upgrade with the customer and inform the
customer of a service interruption (total outage) during the
upgrade. If it is not an Avaya-maintained customer, get
password information.
You can obtain downtime from QPPCNs.
Before upgr Project Mgr
Upgrade preparation steps
What When Who

Table of Contents

Other manuals for Avaya MCC1

Related product manuals