Release 9si/10si/Communication Manager 1.x to Communication Manager 2.1
Task list: R9si/10si/Communication Manager 1.x to Communication Manager 2.1
SI Installation and Upgrades 41
June 2004
8 Check link status
NOTE:
Because of a change in Release 1.3 of Avaya Communication Manager, you do not need to
disable Terminal Translation Initialization (TTI) before an upgrade or enable it afterwards.
9 Save translations
10 Save announcements (TN750 or TN750B only)
11 Shut down DEFINITY LAN Gateway
12 Shut down DEFINITY AUDIX system
13 Determine active SPE
14 Upgrade software
15 Deliver or install the License File
16 Administer no-license/emergency numbers
17 Set Daylight Savings rule
18 Verify the upgrade
19 Check link status
20 Verify software version
21 Power up DEFINITY LAN Gateway system
22 Power up DEFINITY AUDIX system
23 Enable scheduled maintenance
24 Register the switch for maintenance
25 Resolve alarms
26 Restore busyouts
27 Restore announcements (TN750 or TN750B only)
28 Check SPE
29 Save announcements and translations
30 Return equipment
Return to Task List
To Next Page
Loading...
