Avaya MCC1 - Page 8

Contents
8 SI Installation and Upgrades
June 2004
No connection between the switch and RFA 84
Administer No-License/Emergency Numbers [from G3V4] 85
Verify the upgrade [from G3V4] 85
Check customer options [from G3V4] 86
High or Critical Reliability 86
All 86
Restore busyouts [from G3V4] 86
Run acceptance tests [from G3V4] 87
Test single-carrier cabinet systems 87
Test multi-carrier cabinet systems 87
Test telephones and other equipment 88
Enable Scheduled Maintenance and Alarm Notification [from G3V4] 88
Register the switch for maintenance [from G3V4] 89
Restore announcements (TN750 or TN750B only) [from G3V4] 91
Rerecord announcements [from G3V4] 92
Save announcements and translation (TN750
or TN750B only) [from G3V4] 92
Return equipment [from G3V4] 93
Helpful links 93
R5/R6/R7/R8si to Avaya Communication Manager 95
• Introduction 95
When to use the TN2401 versus the TN2401/2400 sandwich pack 95
About circuit-pack carriers 97
Before you begin the upgrade 97
Preparation and process steps 97
Make the Blowback Tape 100
• Task List: R5/R6/R7/R8si to Avaya Communication Manager 101
Verify the required hardware [from R5/R6/R7/R8si] 102
Provide the required tools [from R5/R6/R7/R8si] 103
Go to the RFA website [from R5/R6/R7/R8si] 104
G3V4 through Release 9si upgrades only 105
Direct connection between the switch and RFA 105
No connection between the switch and RFA 105
If you have problems with RFA 106
Pre-upgrade administration [from R5/R6/R7/R8si] 106
Verify the software version [from R5/R6/R7/R8si] 107
Verify system status [from R5/R6/R7/R8si] 108