Avaya PARTNER Advanced Communications System - Page 375

Upgrading the System
Adding New Modules
10-9
Figure 10-4. Removing the Plastic Protector
5. Before you insert the new module, make sure that all 400 (or 200) modules are installed to the
right of all 012E, 308EC, or 206 modules. If you have a T1 module or a 1600 DSL module, it
must be in the first slot on the left of the carrier (see Figure 10-5). If you need to move a
module to accommodate the new one, see “Replacing Modules” on page 10-11.
Figure 10-5. Placement of Modules
PARTNER ACS Release 5.0 and later supports Endeavor telephones when an
Endeavor 362EC module is installed in the carrier. Install the Endeavor 362EC
module(s) to the right of the T1 module (if installed) or 1600 DSL module (if installed),
and to the left of any 400 and 200 module.
Tab
Tab
P
A
R
T
N
E
R
3
0
0
0
308EC
1600 DSL
Processor
P
A
R
T
N
E
R
3
0
0
0
L
I
N
E
S
PFT
E
X
T
E
N
S
I
O
N
S
PFT
T1 or