Flow Charts
E-5
System Flow Chart—Extensions (Continued)
Call
Waiting
Dial #316
Dial a system extension #
Dial 1=Assigned
2=Not Assigned
Press
n to program another extension
Caller
ID Log Answered Calls
Dial #317
Dial a system extension #
Dial 1=Active
2=Not Active
Press
n to program another extension
Caller
ID Log Line Association
Dial #318
Dial a system extension #
Dial a system line #
Press
n to program another extension
To associate another extension:
Press
N P, enter a
new extension # and repeat above steps
Caller ID Log All Calls
Dial #319
Dial a system extension #
Call Coverage Rings
Dial #320
Dial one digit (1-9) for the # of rings before the
call is sent to the covering extension 2 rings
For Centralized Telephone Programming, see
following pages
VMS
Cover Rings
Dial #321
Dial one digit (1-9) for the # of rings
before the call is sent to the voice messaging
3 rings
Copy
Settings
Dial #399
Dial a source extension #
Dial target extension #s
2.0
2.0
2.0
2.0
2.0
3.0
3.0
Line Access Mode
Dial
#313
Dial a system extension #
Dial 1=Pooled
all extensions except 10
2=Key
extension 10 only
Press
n to program another extension
Pool
Access Restriction
Dial
#315
Dial a system extension #
Dial a pool number (880, 881, 882, or 883)
Dial 1=No Restriction
2=Outgoing Only
3=Incoming Only
4=No Access
Press
n to program another pool.
To program another extension:
Press
N P to enter a
new extension # & repeat above steps
Pool Extension Assignment
Dial
#314
Dial a system extension # to remove existing pool
assignments, press
r before selecting a
line
Dial a pool access code (880, 881, 882, or 883)
Dial 1=Assigned
880,
2=Not Assigned
881,882,883,
3=Select Button then press a programmable
button (auxiliary pools only)
Press
N P to enter a
new extension # & repeat above steps
2.0
Remote Call Forwarding
Dial
#322
Dial 1=Assigned
2=Not Assigned
6.0
To Next Page
Loading...
