Avaya PARTNER Advanced Communications System - Page 446

PARTNER
®
Advanced Communications System Installation, Programming, and Use
E-6
System Flow Chart—Dialing Restrictions and Permissions
Outgoing Call Restriction
Dial #401
Dial a system extension #
Dial 1=No Restriction

2=Inside Only (intercom)
3=Local Only (intercom and local)
Press
n to program another extension
Toll Call Prefix
Dial #402
Dial 1=0/1 plus Area Code and # 
2=Area Code and # only
System Password
Dial
#403
Dial four digits to set the password
Disallowed List Assignments
Dial #405
Dial a system extension #
Dial a list # (1-8)
Dial 1=Assigned
2=Not Assigned

Press
n to program another list
To program another extension:
Press
NP to enter
a new extension # & repeat above steps
Emergency Phone Number Lists
Dial #406
Dial a list # (01-10)
To add entry:
Dial the telephone # (up to 12 digits)
Press
e
Press r to remove a list entry
Press
n to program another list entry
Allowed List Assignments
Dial #408
Dial a system extension #
Dial a list # (1-8)
Dial 1=Assigned
2=Not Assigned

Press
n to program another list
To program another extension:
Press
NP to enter
a new extension # & repeat above steps
Allowed Phone Number Lists
Dial #407
Dial a list # (1-8)
Dial a list entry (01-10)
To add entry:
Dial the telephone # (up to 12 digits)
Press
e
Press r to remove a list entry
Press
n to program another list entry
To program another list:
Press
NP to enter
a new list # & repeat above steps
Disallowed Phone Number Lists
Dial #404
Dial a list # (1-8)
Dial a list entry (01-10)
To add entry:
Dial the telephone # (up to 12 digits)
Press
e
Press r to remove a list entry
Press
n to program another list entry
To program another list:
Press
NP to enter
a new list # & repeat above steps
Star Code Dial Delay
Dial #410
Dial 0=0 Seconds Delay 
1=1 Second Delay
2=2 Seconds Delay
3=3 Seconds Delay
4=4 Seconds Delay
5=5 Seconds Delay
6=Not Active
Forced Account Code List
Dial #409
Dial a list # (01-99)
To add entry:
Dial the account code (up to 6 digits)
Press
e
Press r to remove a list entry
Press
n to program another list