PARTNER
®
Advanced Communications System Installation, Programming, and Use
Installing Telephones
2-34
Desk-Mounting the Telephone 2
Follow these steps to desk-mount a telephone:
1. Gently place the telephone upside down.
2. Route the telephone cord through the hole in
the top center of the stand (see Figure 2-26).
Figure 2-26. Routing the Telephone
Cord
3. Insert the tabs on the narrow end of the stand
into the slots on the inside bottom edge of the
telephone (see Figure 2-27).
Figure 2-27. Inserting the Tabs
To Next Page
Loading...
