Confidential
5-20
1.4.13 EEPROM Customizing (User-accessible) (Function code 52)
<Function>
This function allows users to customize the EEPROM settings such as language, function
settings or worker switch settings.
Note:
This function is applicable to “France and surrounding countries”, “Pan-Nordic”, “Oceania” and
“Iberia” areas only.
<Operating Procedure>
(1) Press the Menu, Black Start and Menu buttons in this order in the ready state.
The “0” will appear on the LCD.
(2) Press the 5 and 2 buttons in this order.
The “Set Country / Press OK” will appear on the LCD.
(3) Press the OK button.
The country name will appear on the LCD.
Note:
The country name indicated on the LCD varies depending on the area (code input in
Function code 74) as shown in the table below.
France and
surrounding
countries
Oceania Pan-Nordic Iberia
France Australia Norge España
België / Belgique New Zealand Suerige Portugal
Nederland Suomi
Danmark
Others
(4) Press the or button to display the country name where the machine is used. Press
the OK button while the country name is being indicated.
The EEPROM is customized, and the machine returns to the ready state.
To Next Page
Loading...
