BRUEL & KJAER VIBROCONTROL 8000 - 13.5.3 CMS-HD (Internal Solid Sate Drive)

Page 106 of 188
█ © Brüel & Kjaer Vibro ● S1079330.002 / V04
Technical alterations reserved
EN
13.5.3 CMS-HD (Internal Solid Sate Drive)
CMS-HD uses an internal solid-state drive (SSD) to store CMS data. Users connect directly to the
VC-8000 ethernet port to view CMS-HD data.
IMPORTANT
The CMS ethernet port should not be placed on a public data network (i.e. remote users). For
remote connectivity, use CMS-XC or CMS-PI.
CMS HD does not require configuration. HD enabled hardware will automatically store static and
dynamic data from all CMS enabled modules.
When the HD storage is full it will begin to overwrite the oldest data. The CMS software provides
basic information on the HD storage capacity.
The CMS HD feature requires the rack to have a connection password (see 11.6.3).