Page 72 of 188
█ © Brüel & Kjaer Vibro ● S1079330.002 / V04
Technical alterations reserved
EN
10.3.3 Sort and Multiple Column Sort
You can sort a single column. Click the
mouse on the column header to sort by
that column. Click on the column label
again to change the order of the sort.
You can sort multiple columns. Sort
the first column by clicking the mouse
on the column header. Then press the
SHIFT key and click the second
column header. Then press the SHIFT
key and click the third column header.
In the screen capture (Figure 10-5),
the grid was sorted first by machine
(pump), second, by units, and then
third, by measurement type.
Figure 10-5) Use SHIFT + mouse click to multi-sort
10.3.4 Disable Unused (Spare) Channels
Disable channels from the Channels Tab.
Deselect the box in the ‘On’ column. It also
helps to change the tag name of disabled
channels to “Spare”.
Figure 10-6) Disable Unused Channels
10.3.5 Configuration Errors
When configuration errors occur, the channel with the error will be marked with a red ‘X’. The setting
that caused the error may be on another tab (or view).
Hover the mouse over the red X to see a description of the error. Or, clicking on the red X to display
the error at the bottom of the window.
Figure 10-7) Configuration Error Indication
To Next Page
Loading...