BRUEL & KJAER VIBROCONTROL 8000 - 12.1.1 Rack View

© Brüel & Kjaer Vibro ● S1079330.002 / V04 ● █ Page 83 of 188
Technical alterations reserved!
Brüel & Kjaer Vibro │ Instruction
VC-8000 MPS
Content
EN
12.1.1 Rack View
Connect MPS Maintenance software to see the Rack view.
Rack view shows the status of specific functions of the RCM and SAM (on the left panel). It also
shows bar graph values and icons for each relay channel status. The display is organized according
to the layout of the rack (slot/channel).
1. RCM functions (status)
(here the rack is OK, and
there are no active
commands).
2. Modbus and CMS status
(here both Modbus and
CMS are running)
3. Power Supply status (here
there is P2 only).
4. Relay channel icon (here
the relay is active).
5. Relay channel icon (here
the relay is not active).
6. Relay channel icon (here
the relay is disabled
(unused)).
7. Percent-to-Danger Line
8. Rack List View icon.