BRUEL & KJAER VIBROCONTROL 8000 - 10.3 Helpful Tips; 10.3.1 Default Units; 10.3.2 Copy and Paste

© Brüel & Kjaer Vibro ● S1079330.002 / V04 ● █ Page 71 of 188
Technical alterations reserved!
Brüel & Kjaer Vibro │ Instruction
VC-8000 MPS
Content
EN
10.3 Helpful Tips
10.3.1 Default Units
Before you start adding modules - set the default
units (imperial or metric) from the File menu.
New modules and channels will default to these
units.
Figure 10-2) Set default units
10.3.2 Copy and Paste
The software supports copy and paste functions.
You can copy a single cell and paste to multiple
cells. You can also copy a block of cells and
paste to a block of cells. You can also copy and
paste from Microsoft Excel.
Figure 10-3) Pasting Across Multiple Cells
Figure 10-4) Copy and paste from Excel
NOTE!
All cells can be copied, but some cells do not support ‘paste’ functionality.