Canon MVX200 E - Color Balance Check

MVX250i E, MVX200i E, MVX200 E
SERVICE MODE · ADJUSTMENT
33
5-7 Color Balance Check
Preparation)
(1) Carry out this correction in the product state.
(2) Adjustment Conditions
Program AE : AUTO
AF : OFF
Image stabilizer : OFF
Digital zoom : OFF
CHART Lightbox (5600°K), and color bar chart
M.EQ. Vectorscope
TP/TRIG. VIDEO OUT
SPEC. R : × 1.75 98° (± 0.15, ±5°), Ye : × 0.9 175° (± 0.15, ±5°)
Procedure)
(1) Quit the service mode, and turn power OFF/ON.
(2) Perform light-box recording, and carry out WB SET using the relevant function of the product.
(3) Take an image of the color bar chart, and check that the levels of R, Ye and G are within the specified ranges respectively.
(4) If the result of the above check is NG, carry out camera section adjustment again.