Capintec CAPRAC-t User Manual

CAPINTEC, INC. CAPRAC
®
-t
March 2021 SAFETY 1-5
SECTION: CLEANING INSTRUCTIONS before operating.
CAUTION: Care must be exercised when moving the instrument or when
maintenance is performed. The shielded cylinder is heavy (6.9 kg or 15.2
lb.). It is essential to avoid mechanical shock or vibration of any kind.
CAUTION: It is desirable to leave the unit powered at all times in order to prevent
moisture absorption and to maintain the stability of the instrument
(especially if the instrument is subjected to high humidity or low
temperature).
CAUTION: This equipment generates radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
Electromagnetic Interference (EMI) to nearby devices. However, there is
no guarantee that interference will not occur in a particular installation.
CAUTION: Other devices located in the same general area as the Well Counter may
affect the operation of the system. The high background noise
measurements may indicate a degradation in performance due to EMI.
NOTE: The emissions characteristics of this equipment make it suitable for use
in industrial areas and hospitals (CISPR 11 class A). If it is used in a
residential environment (for which CISPR 11 class B is normally
required) this equipment might not offer adequate protection to radio-
frequency communication services. The user might need to take
mitigation measures, such as relocating or re-orienting the equipment.
CAUTION: If any printer other than one of the models supplied by Capintec is used,
the safety of the unit may be compromised or Electromagnetic
Interference (EMI) may be introduced into other devices located in the
same general area as the CAPRAC
®
-t or the CAPRAC
®
-t may become
susceptible to EMI.
CAUTION: The Well Counter contains lead. Appropriate caution should be taken if
the interior of the unit is exposed. The unit should be disposed of in
accordance with local and national regulations.
CAUTION: The Readout unit contains a Lithium Battery. This should be disposed of
in accordance with local and national regulations.
CAUTION: The user should always verify the validity of any measurement or test
result in order to minimize measurement errors.
Note: It is recommended that periodic (every five years) re-calibration of the unit be
performed only by Capintec’s Authorized Service Center (reference CHAPTER 13:
CLEANING AND MAINTENANCE) to guarantee that the instrument's high reliability is
maintained).

Capintec CAPRAC-t Specifications

General

Brand	Capintec
Model	CAPRAC-t
Category	Cash Counter
Language	English