CAPINTEC, INC. CAPRAC
®
-t
March 2021 SAFETY 1-3
WARNING AND CAUTION LABELS
The system power requirements and the replacement fuse values for power line voltages are
located on the back of the Readout Unit (Figure 1-1).
Figure 1-1
CAUTION: Please reference CHAPTER 13: CLEANING AND MAINTENANCE,
SECTION: FUSE SERVICING for instructions on how to change the
CAUTION: For continued protection, replace only with same type and rating of
fuse(s). A fire hazard may exist if the wrong rating of fuse is installed.
Located on the bottom of the Well Counter is a label (Figure 1-2) which pertains to the
electrical safety of the Well Counter. It is necessary because of the high voltage present
(600-1100 Volts DC) on the inside of the Well Counter. A screwdriver is necessary to remove
the cover.
To Next Page
Loading...