To Next PageTo Next Page
Need help?Do you have a question about the Capintec CAPRAC-t and is the answer not in the manual?
General| Brand | Capintec |
|---|---|
| Model | CAPRAC-t |
| Category | Cash Counter |
| Language | English |
General introduction to safety information, symbol definitions, and tips.
Explains the meaning of various symbols used in the manual.
Details the warning and caution labels found on the instrument.
Lists important cautions and notes for safe operation.
Provides practical safety advice for using the device.
Describes the intended purpose and users of the CAPRAC®-t Well Counter.
Explains how the CAPRAC®-t Well Counter operates and its capabilities.
Details the technical aspects of the instrument.
Explains the purpose and function of the Wipe Test.
Specifies the environmental conditions for operation and storage.
Details power input requirements for the readout and optional printers.
Provides physical dimensions for the console and well counter.
Lists key performance specifications of the detector and system.
Lists the standards the CAPRAC®-t complies with.
Shows and describes the main interface screen of the CAPRAC®-t.
Explains how to input data using the keypad screens.
Accesses Well Counter measurements like background, wipes, and general.
Accesses the automatic calibration measurement procedure.
Accesses Quality Assurance Tests like System, MDA, and Chi Square.
Accesses various reports including Auto Calibration and Wipe reports.
Accesses utility functions like conversion and decay calculators.
Allows system setup for units, printer, display, staff, and detector settings.
Displays the numeric keypad for data entry.
Displays the alphanumeric keypad for data entry.
Displays a list of available selections for choosing items.
Screen for entering or adjusting the current date and time.
Instructions for checking the condition of the shipment.
Details the process of unpacking and setting up the instrument.
Provides instructions for assembling the Readout/Stand Base and system.
Specifies the environmental conditions for operation and storage.
Lists the power requirements for the readout and optional printers.
Lists tests to be performed before operational use.
Explains the security status settings and user management.
Instructions for adding new user accounts with different roles.
Procedures for modifying existing user data.
How to switch between logged-in users.
Steps to log in as the root user for administrative tasks.
Instructions for changing the root user's password.
Procedure for setting the system's security status.
Steps to deactivate user accounts, preventing login.
Steps to re-enable previously inactivated user accounts.
Procedure for logging in as a guest user with limited access.
Guide for setting the system's date and time.
How to select measurement units (Curies or Becquerels).
Options for setting the date display and print format.
Information on setting up and using printers.
How to select the compatible printer for the system.
How to select the USB PC driver protocol (Legacy or CDC).
How to adjust screen timeout, sleep brightness, and brightness.
Procedure to recalibrate the touch screen for accuracy.
How to adjust the system speaker volume.
Information on inputting Cs137 test source data for System Test.
Details on efficiency data used for activity conversion.
Instructions for adding, editing, and deleting user-defined nuclides.
How to set up parameters and locations for wipe measurements.
Instructions for changing the system password for enhanced security.
Steps for configuring the Well Counter settings.
How to select and edit nuclide efficiencies.
Procedure to measure efficiency for a selected nuclide.
Steps to add a user-defined nuclide with its parameters.
Defines trigger levels for various measurement types.
How to set the trigger level and count time for background measurements.
How to set trigger level, count time, and nuclides for work areas.
How to set parameters for unrestricted areas.
How to set parameters for sealed sources.
How to set parameters for package measurements.
Instructions for setting up wipe test locations.
How to set the trigger level for a specific wipe location.
How to set the count time for a specific wipe location.
How to select nuclides to look for in wipe samples for a location.
Steps to modify the details of an existing wipe location.
Steps to remove a wipe location from the system.
Instructions for changing the system password.
Option to set the password using the unit's serial number.
Explains the purpose of diagnostics for system integrity.
Initiates the system diagnostic testing procedure.
Outlines tests for ensuring proper operation at intervals.
Tests to perform before initial operational use of the unit.
Regular tests to ensure ongoing performance and reliability.
Daily test to verify system functionality and calibration.
Test to check the well counter liner for radioactive contamination.
Caution regarding the importance of the well counter liner.
Explanation of live time, real time, and dead time in measurements.
Procedure for automatically calibrating the detector's gain and energy response.
Procedures for measuring background radiation levels.
Overview of tests for System, MDA, and Chi Square.
Daily test to verify system functionality and calibration.
Test to determine the minimum detectable activity level.
Test to assess the overall counting performance and statistical stability.
Procedure to perform the System Test measurement.
Displays and allows saving of the System Test results.
How to view the spectrum data for the System Test.
Test to determine the minimum detectable activity level.
Procedure to perform the background measurement for MDA Test.
How to select the nuclide for the MDA Test.
How to input the precision factor for MDA calculation.
How to input the correction factor for MDA calculation.
How to calculate and view MDA test results.
Assessment of counting performance using Chi Square Test.
Setting the duration for each sample in the Chi Square Test.
Setting the number of repetitions for the Chi Square Test.
Procedure to perform the Chi Square Test measurement.
How to save and view Chi Square Test results.
Option to print the Chi Square Test results.
How to view the spectrum data for Chi Square Test.
Guidance on interpreting Chi Square values based on repetitions.
Explains the purpose of the Wipe Test module for contamination detection.
Procedures for measuring background radiation levels.
Steps for measuring wipe samples from selected locations.
Procedures for measuring general radiation levels in samples.
Setting the counting time for background measurements.
Procedure to perform the background measurement.
How to select and arrange wipe locations for measurement.
Steps to measure selected wipe samples.
Setting the counting time for wipe measurements.
Procedure to measure a wipe sample.
Options for handling measured wipe results (skip, save, report).
Procedures for measuring general radiation levels in samples.
Setting the counting time for general measurements.
Selecting nuclides or defining regions of interest for general measurements.
Setting the Region of Interest by specifying start and end keV.
Procedure to measure a general sample.
Overview of the Reports module for viewing and printing saved tests.
Accessing and searching for Auto Calibration reports.
Accessing and searching for System Test reports.
Accessing and searching for MDA Test reports.
Accessing and searching for Chi Square Test reports.
Accessing and searching for Wipe Test reports.
How to set the date range for searching reports.
Performing a search for Auto Calibration results within a date range.
How to view the detailed report for a specific Auto Calibration.
How to view the detailed report for a specific System Test.
Option to print the detailed System Test result.
Procedure to inactivate a System Test result.
Procedure to inactivate an MDA Test result.
How to view the spectrum data for an MDA Test.
Performing a search for Chi Square Test results within a date range.
How to view the detailed report for a specific Chi Square Test.
Procedure to inactivate a Chi Square Test result.
Procedure to inactivate a Chi Square Test result.
How to view the spectrum data for a Chi Square Test.
Performing a search for Wipe Test results within a date range and type.
How to view the detailed report for a specific Wipe Test.
Option to print the detailed Wipe Test result.
Procedure to inactivate a Wipe Test result.
Procedure to inactivate a Wipe Test result.
How to view the spectrum data for a Wipe Test.
Introduces calculation utilities: Curie/Becquerel conversion and Decay Calculation.
Utility for converting between Curies and Becquerels.
Utility to calculate source activity at a different time.
How to select the nuclide for the decay calculation.
Inputting the start/end dates and activities for calculation.
Inputting the start date and time for the decay calculation.
Inputting the starting activity for the decay calculation.
Inputting the end date and time for the decay calculation.
Displays the calculated ending activity from the decay calculation.
Provides basic maintenance information for the user.
Instructions for cleaning the instrument components.
Recommendations for preventative maintenance tasks.
Guidance on proper disposal of the equipment.
Information on servicing and warranty.
Instructions for replacing the readout unit fuses.
Instructions for replacing the internal battery.
Guide for diagnosing and correcting common problems.
Critical safety caution to disconnect power before cleaning.
Specific instructions for cleaning and replacing the well counter liner.
Methods for disinfecting surfaces using bleach or alcohol.
Caution regarding the necessity of the well counter liner.
Recommendations for preventative maintenance tasks and QA tests.
Caution regarding the necessity of the well counter liner.
Critical caution regarding fuse replacement.
Instructions for replacing the internal lithium coin battery.
Specifies the required battery type for replacement.
Caution regarding handling internal flexible cables during battery replacement.
Steps for installing the new battery correctly.
Instructions for reassembling the stand base after battery replacement.
Steps to power up the unit after maintenance.
Guide for diagnosing and correcting common problems.
Lists default nuclides with half-life, photopeaks, and efficiency.
Details the terms, conditions, and limitations of the product warranty.
States conformity with EC directives and CE marking requirements.
