Capintec CAPRAC-t User Manual

CAPINTEC, INC. CAPRAC
®
-t
6-38 WELL COUNTER INITIALIZATION April 2021
Work Area Settings
From Figure 6-28 Well Wipes Setup Screen, touch the EDIT DEFAULT WORK AREA
SETTINGS button. Figure 6-30 Edit Default Work Area Settings Screen will appear.
Figure 6-30 Edit Default Work Area Settings Screen
To save the displayed values, touch the ACCEPT button. Any changes made will be saved
and Figure 6-28 Well Wipes Setup Screen will re-appear.
To return to Figure 6-28 Well Wipes Setup Screen without saving any changes, touch the
CANCEL button.
Work Area Trigger Level
Note: The Work Area Trigger Level will be displayed in dpm if the system is set to
Curies or Bq if set to Becquerels.
When the activity of a Wipe sample for a particular nuclide exceeds the Wipe Area
Trigger Level, “HIGH” will be displayed on the screen and printed on the report.
To change the Default Work Area Trigger Level, touch the Trigger Level: field box.
The numeric keypad will appear. Input the new Trigger Level by touching the
appropriate numbers on the keypad. Touch the ACCEPT button to accept the entered
value. Touch the CANCEL button to abort any changes.

Capintec CAPRAC-t Specifications

General

Brand	Capintec
Model	CAPRAC-t
Category	Cash Counter
Language	English