Capintec CAPRAC-t - Well Counter Initialization; Test Source Data; Efficiencies Data; User Nuclides

CAPINTEC, INC. CAPRAC
®
-t
April 2021 WELL COUNTER INITIALIZATION 6-1
CHAPTER 6
WELL COUNTER INITIALIZATION
Chapter 6 ............................................................................................................ 6-1
GENERAL ....................................................................................................... 6-1
WELL COUNTER SETUP ............................................................................... 6-2
TEST SOURCE DATA .................................................................................... 6-6
Serial Number (S/N) Field .......................................................................... 6-7
Calibrated On Field .................................................................................... 6-8
Calibrated Activity Field ............................................................................. 6-8
EFFICIENCIES DATA .................................................................................... 6-10
Wipe Full Spectrum Efficiency ................................................................. 6-11
Nuclide Efficiency ..................................................................................... 6-13
USER NUCLIDES .......................................................................................... 6-24
Adding a User Nuclide .............................................................................. 6-24
Editing a User Nuclide .............................................................................. 6-29
Deleting a User Nuclide ............................................................................ 6-30
WIPE TESTS SETUP ..................................................................................... 6-31
Trigger Levels ............................................................................................ 6-35
Background Settings ................................................................................ 6-36
Work Area Settings ................................................................................... 6-38
Unrestricted Area Settings ....................................................................... 6-40
Sealed Sources Settings ........................................................................... 6-41
Package Settings ....................................................................................... 6-42
Setup Location .......................................................................................... 6-42
SETUP PASSWORD ...................................................................................... 6-52
Change the Password ............................................................................... 6-52
Set Password to the last 3 digits of the unit S/N ..................................... 6-53
GENERAL
This section describes initialization and parameter setup for the Well Counter. This includes
selecting nuclides for identification, inputting the Cs137 Test Source information, setting of
trigger levels, setting nuclide efficiencies, setting user nuclides and setting wipe areas and
locations.