CAPINTEC, INC. CAPRAC
®
-t
April 2021 REPORTS 11-15
Exit Detailed Result
To exit Figure 11-9 System Test Result Screen, touch the BACK button. Figure 11-7
System Tests Search Screen after Search will re-appear.
MDA REPORT
From Figure 11-2 Reports Screen, touch the MDA REPORT button. The Search MDA Tests
Screen will appear and be similar to that shown in Figure 11-3 Auto Calibration Search
Screen.
The MDA Test results are searchable by using a date range. The default From: and To:
dates are “today”.
Set Date
To change the From date, touch the From: field box. The Enter Start Date screen will
appear.
The screen displays the currently set date. Above and below each of the fields are + and –
buttons, respectively. To adjust the displayed value for a specific field, touch the + button to
increase the displayed value or the – button to decrease the displayed value.
For the year, +10 and -10 buttons are provided to quickly change the tens column of the
years.
Touch the ACCEPT button to accept the set date or the CANCEL button to cancel any
changes. The Search MDA Tests Screen will re-appear showing the set date.
To change the To date, touch the To: field box. The Enter End Date screen will appear.
The screen displays the currently set date. Above and below each of the fields are + and –
buttons, respectively. To adjust the displayed value for a specific field, touch the + button to
increase the displayed value or the – button to decrease the displayed value.
For the year, +10 and -10 buttons are provided to quickly change the tens column of the
years.
Touch the ACCEPT button to accept the set date or the CANCEL button to cancel any
changes. The Search MDA Tests Screen will re-appear showing the set date.
To Next Page
Loading...
Need help?
General