CAPINTEC, INC. CAPRAC
®
-t
April 2021 REPORTS 11-11
Figure 11-9 System Test Result Screen
The following sections describe the functions that are available from Figure 11-9 System
Test Result Screen.
Print Detailed Result
If a printer is attached to the system, the detailed report of the selected System Test
result can be printed by touching the PRINT button.
Inactivate a System Test
A System Test result can be inactivated. Reasons for doing this can be:
• the test was a simulation for training,
• a mistake was made doing the test, etc.
The System Test result will still be saved in the database. When the test is displayed
on the list, it will be shown with a line through the characters. When the summary
report is printed, the word “INACTIVE” and the optional comment will appear instead
of the data. When the individual report is printed, “INACTIVE” and the optional
comment will appear.
To inactivate the selected System Test, touch the INACTIVATE button. Figure 11-10
Inactivate Record Screen will appear.
To Next Page
Loading...
Need help?
General