Capintec CAPRAC-t - Measurement Button; AUTO CALIBRATE Button; QUALITY ASSURANCE Button

CAPINTEC, INC. CAPRAC
®
-t
3-2 GENERAL OPERATING INSTRUCTIONS April 2021
Figure 3-1 Main Screen
General usage of the touchable buttons is briefly described. Specific button usage will be
given in the appropriate sections.
MEASUREMENT Button 1
This button provides access to the Well Counter measurements. Touching this button
provides access to the following functions: MEASURE BACKGROUND, MEASURE WIPES
and GENERAL MEASUREMENT.
AUTO CALIBRATE Button 2
This button provides access to the CAPRAC
®
-t’s automatic calibration measurement
procedure.
QUALITY ASSURANCE Button 3
This button provides access to the CAPRAC
®
-t’s Quality Assurance Tests module. Touching
this button provides access to the following tests: SYSTEM TEST, MDA TEST and CHI
SQUARE TEST.
7
4
8
2
1
3
6