CAPINTEC, INC. CAPRAC
®
-t
April 2021 SYSTEM SETUP 4-23
The password, first name and last name can be changed. If root is logged in, the user’s role
can be changed. Reference the appropriate sections under ADDING A USER above for
instructions for each field box.
Touch the CANCEL button to abort any changes. The Setup Staff screen will re-appear
without saving the modified user information.
Touch the ACCEPT button to save the modified user information. The Setup Staff screen will
re-appear.
Inactivating a User
Users can be inactivated. An inactivated user cannot log in. The user can always be re-
activated.
When a user is inactivated, a line will appear through their name on the Staff Member list.
An Admin user can inactivate a non-admin user but not an admin user (including
themselves).
To inactivate a user, from Figure 4-8 Setup Staff Screen – root, touch the desired user’s
name. The entire line will become highlighted and the EDIT button will appear in the lower
left portion of the screen as shown in Figure 4-14 Setup Staff with Name Highlighted – root.
Touch the EDIT button. Figure 4-15 Edit User Screen – root or Figure 4-16 Edit User
Screen – Admin will appear.
Touch the Inactive checkbox. A check mark will appear in the box.
Touch the ACCEPT button to save the modified user information. The Setup Staff screen will
re-appear with a line will through the selected Staff Member’s name.
Touch the CANCEL button to abort any changes. The Setup Staff screen will re-appear
without saving the modified user information.
Reactivating a User
To reactivate a user, touch the checked Inactive checkbox. The check mark will disappear.
Touch the ACCEPT button to save the modified user information. The Setup Staff screen will
re-appear.
Touch the CANCEL button to abort any changes. The Setup Staff screen will re-appear
without saving the modified user information.
To Next Page
Loading...
Need help?
General