Capintec CAPRAC-t User Manual

CAPINTEC, INC. CAPRAC
®
-t
April 2021 WELL COUNTER INITIALIZATION 6-41
To save the displayed values, touch the ACCEPT button. Any changes made will be saved
and Figure 6-28 Well Wipes Setup Screen will re-appear.
To return to Figure 6-28 Well Wipes Setup Screen without saving any changes, touch the
CANCEL button.
Sealed Sources Settings
From Figure 6-28 Well Wipes Setup Screen, touch the EDIT DEFAULT SEALED
SETTINGS button. Figure 6-32 Edit Default Sealed Settings Screen will appear.
Figure 6-32 Edit Default Sealed Settings Screen
Note: The Sealed Trigger Level will be displayed in nCi if the system is set to Curies or Bq if
set to Becquerels.
Entering the Trigger Level, Count Time and selecting Nuclides to look for in Sealed Sources
follows the same procedure as for Work Areas as described beginning on page 6-38.
To save the displayed values, touch the ACCEPT button. Any changes made will be saved
and Figure 6-28 Well Wipes Setup Screen will re-appear.
To return to Figure 6-28 Well Wipes Setup Screen without saving any changes, touch the
CANCEL button.

Capintec CAPRAC-t Specifications

General

Brand	Capintec
Model	CAPRAC-t
Category	Cash Counter
Language	English