CAPINTEC, INC. CAPRAC
®
-t
10-2 WIPE MEASUREMENT PROCEDURES April 2021
Efficiency (reference CHAPTER 6: WELL COUNTER INITIALIZATION, SECTION:
EFFICIENCIES DATA, Wipe Full Spectrum Efficiency).
A Trigger Level is assigned to each category (except General) (Reference CHAPTER 6:
WELL COUNTER INITIALIZATION, SECTION: WIPE TESTS SETUP, Trigger Levels) but
may be customized for each Wipe Location. The calculated activity is compared to the
Trigger Level for the location. If the activity is greater than the set Trigger Level, the activity is
flagged as “HIGH”.
Figure 10-1 Main Screen
To measure a wipe sample, from Figure 10-1 Main Screen, touch the MEASUREMENT
button. Figure 10-2 Measurements Screen will appear.
To Next Page
Loading...