IDU Grounding Chapter 18
FA4800 User Manual Release 1.9.40 18-3
IDU Grounding
The IDU’s grounding post should be connected to the internal ground point, using a ground-
ing wire of at least 10 AWG. The grounding wire should be connected to a grounding rod or
the building grounding system.
The device should be permanently connected to ground.
External Lightning Surge Suppressors and Grounding
A Grounding Kit and Surge Arrestor Unit must be located near the ODU and properly
grounded as illustrated in Figures 18-2 and 18-3 below:
To Next Page
Loading...