The procedure Chapter 20
FA4800 User Manual Release 1.9.40 20-2
2. Connect the Poe device to AC power.
3. Using a crossed LAN cable, connect the LAN-IN port of the PoE device to the Ethernet
port of the managing computer. The ODU will commence beeping at about once per
second, indicating correct operation.
4. Launch the FibeAir2000 Manager.
5. Log on as Installer.
Figure 20-1: Becoming Installer
6. Enter the default password, wireless. After a few moments, the FibeAir2000 Man-
ager main window appears:
To Next Page
Loading...