216
Cisco Aironet 2.4-GHz/5-GHz MIMO 4-Element Patch Antenna (AIR-ANT2566P4W-R)
10. Remove the yellow outdoor installation warning label from the antenna radome.
Outdoor Installations
You can mount this antenna outdoors. If you mount the antenna outdoors, you must provide the mounting hardware. For outdoor
installations, follow the instructions printed on the back of the antenna.
CAUTION: An orientation arrow is printed on the back of the antenna that indicates the proper orientation for the antenna for
outdoor installations. You must install the antenna so the arrow points up to prevent any water intrusion and to provide a drain
for any moisture that may accumulate inside the antenna.
Suggested Cable
Cisco recommends a high-quality, low-loss cable for use with the antenna.
NOTE: Coaxial cable loses efficiency as the frequency increases, resulting in signal loss. The cable should be kept as short as
possible, because cable length also determines the amount of signal loss (the longer the run, the greater the loss).
Obtain Documentation and Submit a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering
additional information, see What’s New in Cisco Product Documentation.
Toreceivenew and revised Ciscotechnical content directly to your desktop, you can subscribeto theWhat’s New in Cisco
Product DocumentationRSS feed. The RSS feeds are a free service.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (1721R)
To Next Page
Loading...
Need help?
General
