468
Cisco WPAN Dipole Antenna (ANT-WPAN-OD-OUT-N)
The following are the Environmental and Mechanical Specifications for the Cisco ANT-WPAN-OD-OUT-N Antenna:
Installing the Antenna
This section contains the following:
Contents of the Antenna Kit
Safety Warnings
Safety Instructions
Tools and Equipment Required
Mounting the Antenna
Contents of the Antenna Kit
The antenna kit contains:
1 x Cisco ANT-WPAN-OD-OUT-N Antenna
Safety Warnings
WARNING: Avoid using or servicing any equipment that has outdoor connections during an electrical storm.
There may be a risk of electric shock from lightning. Statement 1088
WARNING: Do not work on the system, or connect or disconnect cables, during periods of lightning activity. Statement 1001
WARNING: Do not locate the outdoor antenna near overhead power lines or other electric light or power circuits, or where it can
come into contact with such circuits. When installing the antenna, take extreme care not to come into contact with such circuits,
as they may cause serious injury or death. For proper installation and grounding of the antenna, please refer to national and local
codes (for example, U.S.:NFPA 70, National Electrical Code, Article 810, Canada:Canadian Electrical Code, Section 54).
Statement 1052
Specification Description
Operating temperature range -40 to 185°F (-40 to 85°C)
Mount style Direct chassis or bulkhead mount
Location Outdoor
Connector Type N male
Dimensions 7.70 in. length x 1.02 in. diameter
(19.56 cm length x 2.60 cm diameter)
Weight 0.26 lbs (120 g)
Wind rating 265 km/hr (165 mph)
IP rating IP67
Radome Polyester/Fiberglass, UV resistant,
white
Material substance compliance RoHS compliant
To Next Page
Loading...
